Owner manual

132 Using the Projector’s Menus

Creating Your Own Startup Screen

You can transfer any image from your computer or video source to the

projector, and then use it as your startup screen. You can also use it as

the screen to be displayed when the projector is not receiving a signal

or when you press the

A/V Mute button. The image can be a

company logo, slogan, photograph, or any other image you want to

use.

Capturing the Image

Start by displaying the image you want to use. It can be an image from

either a computer or video source such as a DVD player or digital

camera. Then follow these steps to capture the image and transfer it to

the projector:

1. Press the

Menu button on the remote control, highlight the

User’s Logo menu, and press Enter.

2. When you see a message asking whether you accept the present

image as the user’s logo, select

Yes and press Enter.

3. A selection box displays over the image. Use the pointer

button to select the area of the image you want to use. Then press

Enter.

Execute

Video

Audio

Effect

User's Logo

Advanced1

About

Reset All

[ ]: Execute

[Menu]: Exit

[ ]: Select

Setting

Advanced2