Owner manual

Managing Projectors 157
3. If you’re connected over a wired network, the projector’s web
screen opens in the browser window, as shown below.
If you’re connected over an 802.11b wireless network, start NS
Connection and connect to the projector you want to monitor.
Then click on the control bar that appears on the screen. The
projector’s web screen opens in the browser window.
4. Select one of the menu options listed on the left, then change any
settings as needed in the main part of the screen. These settings
correspond to those found in the projector’s menu system; for
details, see Chapter 6.
5. Use the controls at the bottom of the screen just as you would the
corresponding remote control buttons: choose a source, stop the
action, control the volume, size the image, turn off the picture
and sound, or turn the projector’s power on or off.
For details about the remote control, see Chapter 2.
Menus
Functions corresponding to remote control buttons