Owner manual

Maintaining the Projector 169

Cleaning the Air Filters and Vents

Clean the air filters and air intake vents after every 100 hours of use. If

they are not cleaned periodically, they can become clogged with dust,

preventing proper ventilation. This can cause overheating and damage

the projector.

Follow these steps:

1. Turn off the projector and unplug the power cord.

2. To clean the intake vents, EPSON recommends using a small

vacuum cleaner designed for computers and other office

equipment. If you don’t have one, gently clean the vents with a

soft brush (such as an artist’s paintbrush).

3. Gently turn the projector over and remove the filters from the

side and bottom of the projector. Then use a small vacuum

cleaner or soft brush to clean the filters. Slide the filters back into

place when you’re done.

note

To order replacement air

filters without the lamp,

request part number

V13H134A01. See page 1

for ordering information.