Owner manual

Displaying and Adjusting the Image 27

Using Keystone Correction

To adjust your image when it is wider on one side, do the following:

■ Look at the shapes of the icons on the projector’s four Keystone

buttons. Press the button whose icon is the mirror image of the

shape of your screen image. Continue pressing the button until

you are satisfied with the shape of the image.

■ Or press the Menu button on the remote control, select the

Setting menu, and press Enter. From the Setting menu, select

H/V-Keystone in the Keystone menu and press Enter. Select

V-Keystone (for vertical keystone distortion) or H-Keystone (for

horizontal keystone distortion) and press

Enter. Use the

pointer button on the remote control to adjust the keystone

setting as needed.

note

The image will be slightly

shorter after adjusting. If it’s

important to maintain the

correct aspect ratio, use the

menu system to perform

keystone correction, then

adjust the Height setting as

needed. See page 129.

Keystone

buttons

button