Owner manual

Using the Remote Control 37

Adjusting the Image Shape

Even if your projected image has no parallel sides, you can correct the

problem with Quick Corner. Follow these steps:

1. Press the

Menu button on the remote control (or on the

projector’s control panel).

2. Select the

Setting menu and press Enter.

3. From the Setting menu, select

Keystone and press Enter.

4. Select

Quick Corner and press Enter.

You see this screen:

5. Press the

Enter button to select the corner you want to adjust.

6. Use the pointer button on the remote control (or the arrow

buttons on the projector) to adjust the shape.

7. Repeat steps 5 and 6 as needed to adjust any remaining corners.

8. When done, press the

ESC button on the remote control or

projector’s control panel to exit the menu system.

Quick Corner remains selected in the Keystone menu, the Quick

Corner screen appears whenever you press the projector’s

Keystone

buttons. You can then follow steps 5 through 8 above to correct the

shape of your image, or press

ESC to exit Quick Corner.

note

For more information on

using the menu system, see

Chapter 6.

[

]:Adjust

Adjust

[ ] :Move next

[ESC]

:Return (Press 1 second to

reset)

note

If you are not satisfied with

the corrections made, press

the

ESC button for one

second to reset the screen to

its original shape.