Owner manual

Using the Remote Control 39
Zooming Your Image
You can zoom in on a portion of the image using the E-Zoom buttons
on the remote control.
1. Press the
E-Zoom button on the remote control.
You see a crosshair indicating the center of the zoom-in area.
2. Use the pointer button to position the crosshair.
3. Continue pressing the
E-Zoom button to enlarge the selected
area up to 4
× .
4. While the image is enlarged, you can:
■ Use the pointer button to pan about.
■ Press the E-Zoom button to zoom out.
5. When done, press the
ESC button to return to the original size.
Displaying a Picture-in-Picture Video
If you’re displaying an image from equipment connected to
the
DVI, Computer, or BNC port(s), you can open up a smaller
picture-in-picture window on the screen. This window can display
video from equipment connected to either the
Video or S-Video
port.
Setting Up the P-in-P Image
Before starting, make sure the computer or video equipment for your
main image is connected to the
DVI, Computer, or BNC port(s), and
the video equipment for the P-in-P window is connected to the
Video
or
S-Video port. Then select the corresponding video setting:
1. Press the
Menu button on the remote control, and enter the
Setting menu.
2. Highlight
P in P, use the pointer button to select either
Composite or S-Video, then press Enter.
3. Press
ESC to exit the menu system.
note
The Picture-in-Picture
function does not work for
RGB video images.
note
Select Composite if your
P-in-P video equipment is
connected to the Video port.