Owner manual

40 Using the Remote Control
Displaying the P-in-P Image
Make sure your main image source is displayed, then follow these
steps to display and use the Picture-in-Picture window:
1. Press the
P in P button on the remote control.
2. Use the pointer button to reposition the video window; use
the
E-Zoom buttons to reduce or enlarge it.
3. Once the window is located and sized the way you want it, press
the
Enter button; your video continues playing on the screen.
4. When you’re finished viewing the Picture-in-Picture, press the
PinP or pointer button again. The window disappears.
Controlling the Volume
To change the volume, press the or side of the Volume button.
If necessary, you can adjust the tone using the projector’s menu
system. See page 131.
P in P button
Video window
note
To temporarily shut off the
sound (and picture), press
the A/V Mute button.