Owner manual

Using the Remote Control 41
Highlighting Your Presentation
You can display a pointer to call out something on the screen, or draw
straight or curved lines to emphasize particular points. There are three
preset pointer tools you can choose from, and each one can be
customized for a different look.
Using the Pointer Tool
1. To activate the pointer tool, press the Effect button on the
remote control. A pointer appears on the screen.
If you prefer to use a different style of pointer, continue pressing
the
Effect button to select the desired style. Three preset
options are available, but you can customize the look of each one
(see page 42).
2. Use the pointer button on the remote control to position the
pointer on the screen.
3. To draw a straight line, place the pointer where you want the line
to begin and press
Enter. Move the pointer to where you want the
line to end, and press
Enter again.
4. To draw a curved line, place the pointer at the start of the line,
then press and hold the
Enter button until it lights. Then use the
pointer button to move the pointer and draw on the screen.
Press
ESC when done.
5. If you want to draw additional lines, repeat steps 3 and 4.
6. When done drawing, press ESC to clear the screen.
Pointer