Owner manual

52 Connecting to Computers, Cameras, and Other Equipment
3. If you’re using the optional BNC/VGA cable, connect the VGA
connector to the projector’s
Computer port and plug the BNC
connectors into your computer’s monitor ports.
4. Optionally, you can connect an external monitor (see page 57),
play sound through the projector (see page 65), or connect a USB
cable to use the remote control as a mouse (see page 56).
5. When you’ve finished making any connections, see Chapter 1 for
instructions on turning on the projector and adjusting the image.
Once the projector is turned on, be sure to:
■ Enter the projector’s Setting menu, then make sure
Computer Input is set to
Analog-RGB. See page 137.
■ After exiting the menu system, press the remote control’s
Comp1 button, or repeatedly press the Computer/DVI
button on the projector’s control panel to select the correct
source.
Computer (Analog-RGB) should appear on the
screen.