Owner manual

Connecting to Computers, Cameras, and Other Equipment 59
Connecting a Composite Video Source
1. Locate the RCA-style video cable provided with the projector.
2. Connect the cable to the yellow video output connector on your
player and the yellow
Video connector on the projector:
3. If you want to play sound through the projector, see page 65 for
instructions on connecting an audio cable.
4. If you don’t need to make any other connections, see Chapter 1
or the Quick Setup sheet for instructions on turning on the
projector and adjusting the image. Once the projector is turned
on, select the image source: press the
Video button on the remote
control, or press the
Video/BNC button on the projector’s control
panel repeatedly until
Video is displayed on the projected image.