Owner manual

64 Connecting to Computers, Cameras, and Other Equipment
Connecting to a Digital Camera
You can connect your digital camera to the projector using the USB
cable specified for your camera. Then you can use your camera’s
slideshow function or the projector’s CardPlayer feature (see page
page 120) to present images on your camera.
1. Make sure there is no card inserted in the projector’s card slot.
2. Connect one end of the USB cable to the USB Type A port on
the projector, as shown.
3. Connect the other end of the cable to your camera.
Removing the USB Cable
If you’re using CardPlayer to project your images, close the program
before you remove the USB cable from the projector.
1. Position the cursor over the
EJECT button in the upper right
corner of the CardPlayer screen.
2. Press the
Enter button on the remote control to close CardPlayer.
3. Remove the USB cable.
note
Use a cable less than 10 feet
long, and connect the
camera directly to the
projector. Your projector
may not function correctly if
you use a longer cable or
connect your camera to a
USB hub.