Owner manual

Presenting Through a Wireless Network 67
1l
Presenting Through a
Wireless Network
This chapter tells you how to send pictures to the projector through
a wireless network. Using EMP NS Connection, you can project
images shown on your computer screen—including text and
graphics—directly to your audience. Because images are displayed in
real-time, any changes you make on your PC or laptop are
automatically mirrored on the screen.
You’ll find instructions in this chapter on:
■ Starting EasyMP
■ Connecting to the projector in Ad Hoc mode or Access Point
(infrastructure) mode
■ Projecting wirelessly
■ Using projector groups
■ Removing the wireless 802.11b card
Before starting, make sure you’ve installed EMP NS Connection as
described in Appendix A for each computer you want to be able to
connect to the projector. Then follow the steps in this chapter to start
EasyMP, configure your projector and computer, and run EMP
NS Connection.