Owner manual

70 Presenting Through a Wireless Network
Configuring the Connection
You can use NS Connection to connect to the projector and send
images wirelessly in two modes: Ad Hoc mode or Access Point mode.
■ Ad Hoc mode (computer-to-computer mode) lets you connect
just one computer to the projector at a time; it’s easy to set up,
and the only equipment you need is a computer with a wireless
(802.11b) network card or adapter, or a Macintosh with an
AirPort
®
or AirPort Extreme card.
■ Access Point mode (infrastructure mode) lets multiple users
access the projector at the same time and easily trade off control
over the projector. To use Access Point mode, you need a wireless
(802.11b) access point, or an AirPort (or AirPort Extreme) base
station, and one or more computers with wireless network cards
or adapters.
Follow the instructions below for the mode you want to use.
Using Ad Hoc Mode
In order to use Ad Hoc (computer-to-computer) mode, first adjust
your projector and wireless card or adapter settings as described in this
section.
Configuring the Projector
1. Switch the projector to EasyMP and insert the EPSON 802.11b
card (see page 68). You see this screen:
note
Make sure you’ve installed
the NS Connection software
as described in Appendix A.
To connect to the projector
over a wireless network, your
computer must be running
Windows 98, Me, 2000, or
XP. Your Macintosh must
be running OS X 10.2.4 or
later. See Appendix A for
complete system
requirements for projecting
wirelessly.
Config button