Owner manual

Presenting Through a Wireless Network 83
4. Click the Advanced tab. You see a screen like this:
5. Check your wireless card or adapter’s device settings. (Depending
on the type of card or adapter you’re using, some of the settings
may be different than those listed here.)
■ Set the network type to Infrastructure.
■ Set the SSID to match the name assigned to the access point
(which should also be the projector’s ESSID)—for example,
CONF ROOM.
■ Make sure encryption is Disabled.
6. Click the
General tab and make sure that your wireless card or
adapter is enabled.
7. When done making the settings, click
OK to close the wireless
properties dialog box.