Owner manual

Presenting Through a Wireless Network 89
9. Click the AirPort icon on the menu bar at the top of the
Macintosh desktop. You see the AirPort status menu:
10. Check to make sure AirPort is turned on.
11. Select the name of your AirPort network.
Projecting Wirelessly
Once you’ve started EasyMP and set up your projector and computer
in either Ad Hoc mode or Access Point mode, follow these steps to
start NS Connection and project wirelessly.
1. Make sure you’ve installed your wireless 802.11b card (see
page 68).
2. Windows: Select
EMP NS Connection from the Start menu.
Macintosh OS X: Double-click the
EMP NS Connection icon in
your Applications folder.