Owner manual

Presenting Through a Wireless Network 97
The IP address appears in the Projector list and a searching
icon displays:
If the search fails to find a projector with the specified IP address,
the searching icon turns into a question mark. If this happens, run
EasyMP to check the projector’s IP address, then repeat this step.
6. Click the projector you want to connect to, then click the
Connect button. If more than one projector is listed, you can
select additional projectors and connect to them at the same time.
7. If you are prompted for a keyword, enter the four-digit number
displayed on the EasyMP Network screen and click
OK.
The computer’s image is transmitted to the projector. See page 92
for details about using the floating control bar.
This icon
indicates search
is in progress
This icon appears if
the search fails to
find the projector
note
You can connect to a
projector while another
person is using it. Follow the
steps on page 98.