Camera Accessories User Manual

8-4
Using CompactFlash Memory Cards
NOTE
If you have problems formatting or using a memory card, try the
following technical support numbers:
Lexar Media: [phone]
SanDisk: [phone]
Removing a Memory Card
Make sure the camera is turned off. Then follow these steps:
1
Lift the cover open and press the Eject button on the
bottom of the camera to eject the card, as shown below.
2
Remove the card by hand, then close the memory card
cover.
CAUTION
Never remove the card while the camera is accessing it. Data in
the card may be lost or damaged. Avoid using or storing the card
in dusty places, in direct sunlight, or in places that become
extremely hot or humid.
Getting Images From a Card to Your
Computer
A PCMCIA adapter allows you to access images stored on
CompactFlash cards directly from your computer or
notebook/PowerBook.
™
To use this adapter, your computer
must be equipped with a Type II PCMCIA card slot.
If you’re using a Macintosh, you must enable the PC
Exchange extension software to access files on CompactFlash
cards. See your Macintosh documentation for information.
Eject button
memory card cover
Lily.book Page 4 Tuesday, March 2, 1999 4:06 PM