Camera Accessories User Manual

9-18
Printing Directly From the Camera
Removing Direct Print
If you installed Direct Print and aren’t using it, you can
remove it to create more space for storing images. You can
always upload the program later, using your PhotoPC 750Z
software.
Follow these steps to remove the program:
1
Slide the camera dial lock down and turn the camera dial
to
Play.
2
Press the SEL button.
3
Press the or button until you see the
Software Menu .
4
Press the SEL button.
5
Highlight Add/Delete and then press SEL.
6
Press the button to highlight Delete and press
SEL.
7
Highlight Direct Print V2.2 or Direct Print V2.3 and
press
SEL. The program is deleted.
8
Press the ESC button several times to return to playback
mode.
Reading Error Messages
If you see a message on the LCD screen or display panel
while printing, check the following tables to resolve the
problem.
Message Explanation
Battery is low. Use AC
adapter.
The camera’s battery power is almost out.
Recharge or replace your batteries, or connect
the AC adapter to the camera.
Check Printer Model. The camera is not connected to a compatible
printer. Connect the camera to one of the
printers listed on page 9-1 and then press the
SEL button to begin printing. (If you want
to cancel printing, press the ESC button for
3 seconds.)
No photos in memory This message appears when there are no
photos in the camera’s memory. Press SEL to
return to the Print menu.
Lily.book Page 18 Tuesday, March 2, 1999 4:06 PM