Camera Accessories User Manual

A-2
Optional Accessories
Using the Optional AC Adapter
The AC adapter (B867038) allows you to connect your
PhotoPC 750Z to any standard (110 V) electrical outlet.
This is especially useful for transferring pictures and
operating the camera from your computer, or using Direct
Print. The adapter powers the camera but does not charge
the batteries.
WARNING
◗ Use only the adapter designed for the PhotoPC 750Z. Using any
other adapter may cause fire, electrical shock, or injury.
◗ Do not alter the plug on the power cable, and do not use the
adapter for any other purpose than powering your
PhotoPC 750Z.
To avoid losing any images or settings, make sure the camera
is finished processing. Turn the camera off before you
connect or disconnect the AC adapter. Then follow these
steps:
1
Open the connector cover on the side of the camera.
2
Plug the adapter cable into the DC port on the camera.
3
Plug the AC adapter into an electrical outlet.
Using an Optional Tripod
You can use your PhotoPC 750Z with any standard tripod.
Follow these steps:
1
Assemble and set up the tripod by following the
manufacturer’s instructions. Make sure the tripod is
well-balanced on a flat surface.
PSO
Lily.book Page 2 Tuesday, March 2, 1999 4:06 PM