User`s guide

160
R4CB860
html.bk Rev. F
EPWEB.FM A5 size
10/19/04
L
Proof Sign-off:
KOW N.Mizuno H.Tomizawa
T.Takahashi
NOC K. Lee
WPA Settings
Detailed Settings
Items Explanations
Password Enter the password for WPA-Personal
authentication (8 to 63 characters).
Password (again) Enter the password again.
Items Explanations
RTS/CTS Handshake
Control
Select either Enable or Disable. Select Enable to
avoid data collisions, known as “Hidden Station”
problem. When this is enabled, the station and
its access point use the RTS/CTS protocol. The
station sends an RTS signal to the access point,
notifying that it is going to send the data. When
the access point receives the RTS signal, it
responds with a CTS signal to all stations within
its range to require them to delay data
transmission.
RTS/CTS Threshold
Value
Specify the threshold (number of bytes)
between 0 and 2347. Data with its frame size
larger than this value performs the RTS/CTS
handshake.
Roaming Function Enables or disables the roaming function.
AP Density To get the continuous connection of the same
access point, select Low. When you select High,
roaming around access points is made easy.
The network interface switches to the other
access point if it has a better radio wave
condition.