User`s guide

273
R4CB860
html.bk Rev. F
TRBLE.FM A5 size
10/19/04
R
Proof Sign-off:
KOW N.Mizuno H.Tomizawa
T.Takahashi
NOC K. Lee
Macintosh environment
NetWare environment
On the Advanced tab of the
Local Area Connection
Properties dialog box, the
Internet Connection Firewall
setting is on.
In the EPSON Scan Setting dialog box,
click the Add button. In the Add dialog
box, select the Enter address radio
button and then enter the IP address.
Devices do not appear in Chooser.
Cause What to do
You may have selected a
wrong one for “Connect via”
in the AppleTalk Control
Panel.
Make sure to select Built-in Ethernet or
AirMac in AppleTalk Control Panel, and
make sure AppleTalk is active in
Chooser. Also, check the network
equipment including the hub cable.
The Rendezvous printer setting is overwritten by the
AppleTalk printer setting when the same printer is set up with
AppleTalk after the printer is set up with Rendezvous.
Change the AppleTalk printer name so that it does not conflict with the
Rendezvous printer name.
Nothing prints even though clients have sent data to the device.