Specifications

117
Show Progress Meter
Displays printing progress while printing.
EPSON Printer Port (For Windows Me, 98, and 95 only)
Speeds up the data transfer rate to EPSON printers.
Enable DMA transfer (For Windows Me, 98, and 95 only)
If your computer has a parallel port which supports ECP mode,
you can enable DMA transfer to help speed up printing. See your
computer manual to determine if you have ECP support and
DMA transfer.
To determine whether you need to enable DMA transfer, compare
the message below the EPSON Printer Port setting to this table,
and take the recommended action.
Message Action
High Speed (DMA)
Transfer enabled.
DMA transfer is already enabled. Click OK
to close the dialog box.
For higher data transfer
rates, use DMA Transfer.
Follow the steps below this table to enable
DMA transfer.
(No message) Your system’s parallel port setting does not
allow DMA transfer. However, if you change
the parallel port setting to ECP or enhance
using your computer’s BIOS Setup program,
you may be able to use DMA transfer.
Consult your computer manual or
computer maker for instructions. Once you
change the parallel port setting, follow the
steps below this table to enable DMA
transfer.
Note:
Before you run the BIOS Setup program,
uninstall the printer driver using
Add/Remove Programs in the Control
Panel. After running the BIOS Setup
program, reinstall the printer driver.