User`s guide
The table below lists the advanced chipset options.
Advanced chipset control options
Settings
c
Option
Chipset Auto
Configuration
DRAM
Read/Write wait
state
L
+
Enabled *
Disabled
0
1
2*
3
I
Description
Enables or disables automatic
assignment of DRAM wait states
Sets the number of wait states inserted
when the CPU reads or writes data into
the local DRAM: fewer wait states
improve system performance (can only
be set if Auto Configuration is disabled)
*
Default setting to provide optional performance with most configurations
Configuring PCI devices
Select PCI Devices from the Advanced System Setup
screen to configure the devices connected to the PCI option
slots in your computer. The default settings work well for most
configurations. You can, however, set the PCI device options
listed in the table below.
PCI device options
Option
PCI Auto Configuration
PCI Control:
11*
(HCLK PCICLK)
1½
PCI-ISA BCLK Divider
PCI Devices, Slot #1
and Slot #2 options
* Default setting
Settings
Enabled * Enables or disables automatic
Disabled assignment of PCI control values
PCICLK 1/4 *
Determines the PCI bus clock
PCICLK 1/3
cycle time input to the ISA bus
PCICLK 1/2
controller
Description
Selects the speed of the clock
control bits on the ISA bridge
controller chip
Allow you to specify whether
the device is a master or not,
and select the latency timer
default or set the lowest I/O
address that PCI cards may use
Running SETUP and Installing Drivers
2-11