User`s guide

If you are installing a CD-ROM drive, you may need to

connect an audio cable to a sound card. Follow the

instructions in your sound card documentation to connect

the audio cable to the card. (If you need to install a sound

card, see “Installing an Option Card” in Chapter 4.)

Position the audio cable connector so that the tab faces up

and aligns with the notch in the CD-ROM drive’s audio

connector. Then push in the connector.

audio

conne

If you installed a hard disk drive in one of the external bays,

you may want to replace the plastic faceplate. Insert one

side of the plate, then gently press on the other side until it

snaps into place.

10. Replace the internal mounting bracket; see ‘Replacing the

Bracket in the Computer” for instructions.

11. If you have finished installing or removing drives, replace

the computer’s cover; see “Replacing the Cover” in Chapter

4 for instructions. Then see “Running SETUP” in Chapter 2

for instructions on defining your new drive configuration.

Installing and Removing Drives in the Slimline Computer

5-19