User`s guide

Chapter- 6

Installing and Removing Drives in the

Tower Computer

This chapter describes how to install and remove optional

drives in your tower computer. You can use these instructions

to install a variety of devices, including hard disk drives,

diskette drives, tape drives, CD-ROM drives, or other devices.

This chapter describes installing and removing drives in the

Although your drive may look different from the ones

illustrated here, you should be able to install it the same way.

If you are reading this manual online, be sure to print out

this chapter before performing any of the steps it describes.

Follow the appropriate instructions in this chapter to do the

following:

Set the IDE device jumpers

Install a drive in the front internal drive bay

Remove a drive from the front internal drive bay

Install a drive in an externally accessible drive bay

Remove a drive from an externally accessible drive bay

Installing and Removing Drives in the Tower Computer

6-1