User`s guide

Installing a Drive in the Front Internal Drive Bay

You can install a half-height, 3.5-inch drive in the front internal

drive bay.

Installing the Internal Drive

Follow these steps to install a drive in the front internal drive

bay:

Position the drive so its drive and power connectors face the

back of the computer and its circuit board is on the bottom.

Slide the drive into the front internal drive bay as shown

below. Align the holes in both sides of the drive with the

slots in the drive bay. Then secure the drive to the bay with

the four screws that came with it.

Installing and Removing Drives in the Tower Computer

6-5