User`s guide

Diskette Problems
You see a diskette error message.
Reinsert the diskette, making sure you insert it all the way. If
the drive has a latch, turn it down to secure the diskette.
Also, check to see that you have inserted the right type of
diskette in the drive. For example, make sure you are not
inserting a high-density diskette in a double-density drive.
If reinserting the diskette does not solve the problem, insert the
diskette in another diskette drive of the same type. If you can
read the diskette in a different drive, your drive may be faulty.
Contact the dealer from whom you purchased the drive; if the
diskette drive came with your computer, contact your
Authorized EPSON Servicer or the EPSON Connection for
assistance.
The diskette is the right type, but you still see an error.
Check that the diskette is not write-protected, preventing the
drive from writing to the diskette.
Make sure the diskette is formatted. See your operating system
documentation for instructions on formatting diskettes.
The system may have the Diskette access security option
in SETUP enabled. If you entered a User level password when
you started the system, but this option is set to a Supervisor
level, you see an error when you access the drive. See “Using
the virus protection features” in Chapter 2 for more
information.
You may have a defective diskette. Try copying the files from
the bad diskette to a new diskette.
Troubleshooting
7-9