User`s guide

Something is wrong with the data in the files.
Run ScanDisk to repair the files. You may also be able to use
special utilities or diagnostics to solve this problem.
Diskette Drive Problems
A newly installed diskette drive is not working properly.
Make sure you have installed the drive correctly and check all
the cable connections.
You see a diskette drive error when you start your computer.
Run the SETUP program and configure your system for the
correct type of diskette drive. Make sure the Diskette
controller option in SETUP is enabled. See “Configuring
integrated peripherals” in Chapter 2 for more information.
The diskette drive is making loud or unusual noises.
Contact your Authorized EPSON Servicer or the EPSON
Connection.
Hard Disk Drive Problems
A newly installed hard disk drive is not working properly or
ifs performance is not what you expect.
Make sure you have installed the drive correctly and check all
cable connections. Also, check the jumper settings on your
drive.
7-10 Troubleshooting