User`s guide

Chapter 4 Installing and Removing Options
Removing the Cover ........................ 4-2
Replacing the Cover ......................... 4-5
Locating the Internal Components ................ 4-6
Locating the System Board Components .......... 4-8
Changing the Jumper Settings ................... 4-9
Setting the Jumpers ...................... 4-10
Installing Memory Modules (SIMMs) .............. 4-12
Inserting SIMMs ........................ 4-13
Removing SIMMs ....................... 4-15
Installing an Option Card ..................... 4-16
Installing a Card in the Slimline Computer (3-slot Side) 4-17
Installing a Card in the Slimline Computer (2-slot Side) 4-19
Installing a Card in the Tower Computer .......... 4-20
Removing an Option Card ..................... 4-22
Adding Video Memory ....................... 4-22
Installing External Cache ...................... 4-24
Upgrading the Processor ...................... 4-27
Post-installation Procedures .................... 4-30
Chapter 5 Installing and Removing Dives in the Slimline Computer
Setting the IDE Device Jumpers and Locating Pin 1
Removing the Drive Mounting Bracket
Installing a Hard Disk Drive in the Mounting
Bracket
......................
Installing the Hard Disk Drive
Replacing the Bracket in the Computer
Connecting the Hard Disk Drive Cables
Reconnecting the Diskette Drive Cables
Removing a Hard Disk Drive From the Mounting
Bracket
......................
Installing a Drive in an External Drive Bay
......................
Attaching Mounting Frames to the Drive
......................
Installing the Drive
......................
Connecting the Drive and Power Cables
Removing a Drive from an External Bay
......
5-2
......
5-4
......
5-5
......
5-6
......
5-7
......
5-8
......
5-11
......
5-12
......
5-13
......
5-14
......
5-15
......
5-17
......
5-20
ix