User`s guide

Configuring PCI devices
Select PCI Devices from the Advanced System Setup
screen to configure the devices connected to the PCI option
slots in your computer. These options need to be set only if you
installed older PCI devices that do not follow PCI version 2.0
specifications.
Note
If you installed PCI option cards in the computer before
running SETUP, the computer configures the PCI
Devices options automatically by detecting the
information returned from the PCI option cards.
The Slot #1 and Slot #2 options allow you to specify
whether the device is a master or not, and select the timer
values for devices in slots 1 and 2.
Setting the Boot Options
When you select Boot Options from the Main Menu, you
see the Boot Options screen, which allows you to define the
drive boot sequence and determine which power-on diagnostic
tests the computer performs when you start your system.
The SETUP prompt option allows you to enable or disable
display of the message press DEL to run SETUP that
appears when you turn on or reset your computer. If you
disable the message, you can still press Del to start SETUP. The
default setting is Enabled.
The Boot sequence option determines the order in which
the computer checks the drives for an operating system when
you turn it on or reset it.
2-12 Running SETUP and Installing Drivers