User`s guide

Green PC options (continued)
Option Settings
ISA or PCI Master Enabled *
Activity Disabled
Description
Enables or disables checking of
activity from the devices listed
below: leave this option enabled
PM monitor On* Allow you to enable or disable
IRQ1 -IRQ15 Activity Off checking of activity from devices
using IRQs 1 through 15 to
determine whether the system
enters a power-saving mode: the
device using each IRQ is listed on
the screen and varies depending
on your configuration
cause errors in some applications. If you have problems, you may want to
disablethe Hard Disk Standby Timer option (Disabled is the
default setting).
(2) APM enhances your system’s power-saving abilities by providing
increased inactivity detection and lower CPU power states without
degrading performance. Windows may provide a Power icon in the
Control Panel that lets you select the type of APM you want to use: see
the Windows on-line help information about the Power functions.
(3) If you enabled VGA Access Detection and your system’s video is
active, the system does not enter any power-saving modes. If you disable
VGA Access Detection, the system ignores video activity (such as a
blinking cursor) and enters these modes as necessary.
Exiting SETUP
When you leave SETUP, you can save your settings or exit
SETUP without saving your settings. You can also return all
values to the factory defaults.
Running SETUP and Installing Drivers 2-19