User`s guide

Removing SlMMs
If you need to remove SIMMs from your computer (to install
different ones, for example), follow the steps below:
1. Use the illustration under “Locating the System Board
Components” to locate the SIMM sockets on the left side of
the main system board, next to the processor.
2. Remove any option cards that may be blocking your access
to the SIMM sockets; see “Removing an Option Card” for
instructions.
3. Use your fingers or a small screwdriver to carefully pull
away the tabs that secure the SIMM at each end. The SIMM
falls to the side: remove it from the socket.
4. Follow the same procedure to remove any other SIMMs.
5. If you are inserting different SIMMs, follow the instructions
under “Inserting SIMMs” to install them.
Installing and Removing Options 4-15