User`s guide

Replace any option cards you removed; see “Installing an

Option Card” for instructions.

Replace the computer’s cover as described under “Replacing

the Cover. “Then see “Post-installation Procedures” for

instructions on configuring your computer with your new

memory size.

Installing an Option Card

This section explains how to install option cards in your

computer. Your computer has five slots; the three large slots

are ISA compatible and the two smaller slots are PCI

compatible.

Note

The two PCI slots are labelled PC11 and PC12 on the option

slot connector card. The SETUP program uses the PCI slot

number as it configures the PCI cards, so make a note of the

slot number you use for each card.

The slot nearest the main system board accommodates only a

half-length card. In the slimline computer, the two slots facing

the power supply can contain only half-length cards.

Caution

Before you install any option cards in your system, make

sure that each card does not draw more current than the

limits listed in the Appendix.

4-16

Installing and Removing Options