User`s guide

As you install option cards, keep these guidelines in mind:
If you have an S-bit ISA card, you can install it in a 16-bit
ISA slot, as long as it fits.
Install PCI cards only in PCI slots. Note the slot number
printed on the option card connector board beside the slots
you use.
Check the components on your card and the system board
before deciding which slot to use. Make sure that no
component touches or obstructs other cards or cables.
When you unpack the option card, do not touch the
components on the circuit board or the gold-edged
connectors. Place the card gently on top of its original
packing material with the component side facing up. Keep
the packing materials in case you remove it later.
Adjust any switches or jumpers on the card, if necessary,
before you install it. (See the option card instructions.)
If you install a video adapter on an option card you need to
change the setting of jumper JP2 on the system board to
disable the built-in VGA controller; see “Changing the
Jumper Settings” for instructions.
Installing a Card in the Slimline Computer (3-slot Side)
The option card connector board in the slim line computer has
two slots on one side and three slots on the other. Although the
illustration shows an ISA card, you can use the same
instructions to install a PCI card.
Installing and Removing Options 4-17