User`s guide

Chapter- 5

Installing and Removing Drives in the

Slimline Computer

This chapter describes how to install and remove optional

drives in your slimline computer. You can use these

instructions to install a variety of devices, such as hard disk

drives, diskette drives, CD-ROM drives, or other devices.

Note

This chapter describes installing and removing drives in the

slimline computer; if you have a tower computer, see

Chapter 6.

Although your drive may look different from the ones

illustrated here, you should be able to install it the same way.

If you are reading this manual online, be sure to print out

this chapter before performing any of the steps it describes.

Follow the instructions in this chapter to do the following:

Set the IDE device jumpers

Remove the drive mounting bracket

Install a hard disk drive in the mounting bracket

Remove a hard disk drive from the mounting bracket

Install a drive in an externally accessible drive bay

Remove a drive from an externally accessible drive bay.

Installing and Removing Drives in the Slimline Computer

5-1