User's Manual

Graphics

Below is the BASIC program that prints the design shown on the

previous pages. Note that the data numbers in lines 80 through 140

are the same numbers that are at the bottom of each section in the

last illustration. The WIDTH statement in line 10 is for IBM PC

BASIC; the WIDTH statement format may be different for your

system.

10 WIDTH "LPT1:"

20 LPRINT

CHR$;Z$kHR$(39)CHR$(42)CHR$(0);

FOR

X=1 TO 126

40 READ N

50 LPRINT CHR$(N);

60 NEXT X

70 LPRINT

80 DATA 0,0,63,0,0,127,0,0,255,0,3,255,0,15,255,0,31,255

90 DATA 0,127,255,0,255,255,1,255,255,3,255,255,7,255,255,15,

255,255

100 DATA 31,255,254,31,255,252,31,255,240,31,255,240,31,255

224,31,255,192

110 DATA 31,255,0,31,252,0,31,240,0,31,224,0,31,128,0,31,240,0

120 DATA

j1,255,192,28,255,22~,28,127,2~0,28,~5,2~~~3~~0~252~

31,0,126

130 DATA 15,128,15,7,192,7,3,240,7,1,254,7,0,255,7,0,127,135

140 DATA 0,31,199,0,7,231,0,1,247,0,0,255,0,0,127,0,0,63

In this program, line 20 assigns the graphics option (24-pin triple-

density) with code 39. Code 42 sets the number of pin columns at 42.

Lines 80 through 140 contain 126 bytes of data (42-pin columns x 3

bytes) for each pin column. Lines 30 through 60 print the design that

you see below:

4-18

Software and Graphics