User's Manual

Printing
Problem
Solution
Printed characters
are not what you
expected
(continued).
Graphic characters or
The wrong character table is selected. If
lines are being printed
your application program is capable of
instead of the selected
sending control codes, specify the italic
italic characters.
character table using ESC t 0.
The wrong
international
characters are being
printed.
You can also select the italic character
table by changing a DIP switch setting. To
do this, turn off the power, set DIP switch
1-7 to off; then turn on the power. See
Chapter 3.
The wrong international character set is
selected. If your application program is
capable of sending control codes, specify
the desired international character set
using ESC R n. See the description of
ESC R in Chapter 9.
You can also select the international
character table by changing DIP switch
settings. To do this, turn off the power
and set DIP switches 1-1, 1-2, and 1-3 to
the correct positions for the character set
you want. See Chapter 3.
Troubleshooting 7-9