User's Manual

Paper Handling
Problem
Solution
Single sheets do not
feed properly
(continued).
When the LOAD/EJECT
The paper may have been between the
button is pressed, the
edge guides before the printer was turned
paper feeds through
on. When loading single sheets, be sure
and then out of the
that paper is not in the paper guide before
printer.
you turn the printer on.
The paper feed is
crooked.
The paper guide may not be attached, or
it may not be in the correct position.
When printing on single sheets, use the
paper guide in its upright position.
The paper does not
fully eject.
The paper may be dog-eared. Use new
paper.
You may be trying to eject the paper
using the FORM FEED button. Always
press the LOAD/EJECT button to eject the
paper.
The page length setting may be wrong. If
the page length is incorrectly set by your
software, the paper may not fully eject.
Check your software settings.
7-16 Troubleshooting