User's Manual

Paper Handling
Problem
Solution
Continuous paper
does not feed
properly
(continued).
The LOAD/EJECT
button is pressed to
eject the paper, the
paper feed stops, and
paper does not fully
eject or it jams.
Switching between
single sheets and
continuous paper
cannot be
performed properly.
When the LOAD/EJECT
button is pressed to
load continuous paper,
the platen does not
rotate and the paper is
not loaded.
You may have tried to back feed too
many pages. Before ejecting the paper,
always tear off the last printed page. See
Chapter 3.
You may be trying to eject labels. Labels
may jam when they are fed backward, so
always use the FORM FEED button and
feed labels forward to eject them.
Pull the paper release lever forward to the
continuous paper position, set the paper,
then press the LOAD/EJECT button.
Troubleshooting
7-21