User's Manual

Commands Arranged by Topic

ESC U

Turn Unidirectional Mode On/Off

Format:

ASCII code:

ESC U n

Decimal:

27 85 n

Hexadecimal: 1B 55 n

Comments:

The following values can be used for n:

1: Turns the mode on

0: Turns the mode off

Printing is normally bidirectional. This command selects

unidirectional printing for more accurate positioning. This setting

can also be performed by SelecType.

ESC EM

Control Cut Sheet Feeder

Format:

ASCII code:

ESC EM n

Decimal:

27 25 n

Hexadecimal: 1B 19 n

Comments:

The following values can be used for n:

0: Turns mode off

4: Turns mode on

R: Ejects a sheet. (No paper is loaded.)

The command should not be used unless the cut sheet feeder is

installed. It is ignored if any value other than 0, 4, or R is used

for

The cut sheet feeder mode can also be turned on and off by

setting DIP switch 1-8.

9-10 Command Summary