User's Manual

Commands Arranged by Topic

ESC D

Set Horizontal Tabs

Format:

ASCII code:

ESC D n1 n2 . . . 0

Decimal:

27 68 n1 n2 . . . 0

Hexadecimal: 1 B 44 n1 n2 . . . 00

Comments:

This command allows setting of up to 32 horizontal tabs, which

are entered as n1, n2, n3, etc., (from 1 to 255) with the number 0

character terminating the command. The tab settings must be

entered in ascending order. ESC D 0 clears all tabs. The default

settings, when power is turned on or after an ESC @ command,

are at every eight characters. The tab settings are not affected by

changes in cpi. The tab positions in proportional printing are

determined by the 10 cpi character size.

Overall Printing Style

ESC x

Select Letter Quality or Draft

Format:

ASCII code:

ESC

Decimal:

120 n

Hexadecimal: 1B 78 n

Comments:

The following values can be used for n:

0: Selects draft mode.

1: Selects Letter Quality (LQ) mode.

Overrides the SelecType panel setting.

9-22

Command Summary