User's Manual

Commands Arranged by Topic
ESC k
Format:
ASCII code: ESC k n
Decimal: 27
107 n
Hexadecimal: 1B 6B n
Select Typestyle Family
Comments:
This command affects only the Letter Quality typestyle, not draft.
If n = 0, typestyle in the printer is used. To select one of the other
typestyles, use the family number of the font as shown below. For
example, to choose the Prestige font, use 3 for the value of n. The
following values can be used for n:
0: Roman
5: OCR-B
1: Sans Serif
6: OCR-A
2: Courier 7: Orator
3: Prestige 8: Orator-S
4: Script
Typestyle families 2 to 8 are available only if the appropriate font
module is installed, such as the Multi-Font Module.
Overrides the SelecType panel setting and DIP switch font
setting.
ESC !
Master Select
Format:
ASCII code: ESC ! n
Decimal:
27 33 n
Hexadecimal: 1B 21 n
Comments:
Selects any valid combination of the following modes: 10 cpi, 12
cpi, proportional, condensed, emphasized, double-strike, double-
wide, italic, and underline. For details on how to set n, see the
Selecting Typestyles With Master Select section in Chapter 4.
Command Summary
9-23