User's Manual

Commands Arranged by Topic
ESC %
Select User-defined Set
Format:
ASCII code:
ESC % n
Decimal:
27 37 n
Hexadecimal: 1B 25 n
Comments:
This sequence is used to print the user-defined (download)
character set. ESC & is required to define the character set. The
following values can be used for n:
0: Selects the normal set.
1: Selects the user-defined set.
ESC 6
Enable Printable Characters
Format:
ASCII code:
ESC 6
Decimal:
27 54
Hexadecimal: 1B 36
Comments:
When the Epson Extended Graphics character table is selected,
ESC 6 enables the printing of codes 128 through 159 (decimal) as
characters, not control codes. See the Appendix for characters
printed.
ESC 7
Format:
ASCII code:
ESC 7
Decimal: 27 55
Hexadecimal: 1B 37
Enable Upper Control Codes
Comments:
When the Epson Extended Graphics character table is selected,
ESC 7 causes codes 128 through 159 to be treated as control codes.
This is the default.
Command Summary
9-37