User's Manual

Setting Up Your Application Software

Now that you have set up and tested the ActionPrinter 4000, you

should make sure that it works with your application programs.

Most application programs let you specify the type of printer you

are using

so that

the program can take full advantage of the

printer’s features. Many of these programs provide an installation or

setup menu that presents a list of printers to choose from.

If your application program has a printer selection menu, use the

instructions below.

Choosing From a Menu

Because the family of Epson printers shares a great many

commands, you can use an application program even if it does not

list the ActionPrinter 4000 on its printer selection menu. If the

ActionPrinter 4000 is not listed, choose one of the following printers.

They are listed in order of preference.

LQ-510

LQ-800 (LQ-1000)

LQ-850 (LQ-950, LQ-1050)

SQ-2500

LQ-500

LQ-2500

LQ-2550

LQ-1500

If none of these printers is listed, select the first one available on the

following list:

Epson printer

Standard printer

Draft printer

To use all of the features of the ActionPrinter 4000, however, it is

best to use a program with the 4000 or one of the LQ printers on its

menu. If your program does not list the 4000 or one of the LQ

printers, contact the software manufacturer to see if an update is

available.

Setting Up the Printer

1-25