User's Manual

Printing on Special Paper
3. Select the paper thickness you want according to the table
below. For normal use, the lever should always be set to
position 2 on the scale.
Paper Type
Lever Position
Paper (single sheets or continuous)
2
Thin paper
2
24 lb paper
3
Multi-part forms
2-sheet
3
3-sheet
4
Labels
4
Envelopes
Air mail
4 or 5
Plain
6
Bond (20 lb)
6
Bond (24 lb)
7
Note: Lever position 1 is used only when the printed characters
are too light. Setting the lever to position 1 when you are using
thin paper may damage the print head.
l If the lever is set to position 4 or higher, the printing speed may
be reduced slightly.
2-22
Paper Handling