User's Manual

Printing

Special Paper

Reattach the printer cover as shown below.

To help you check the position of the paper thickness lever, the

orange

MULTI-PART

light on the control panel comes on if the

lever is set to position 4 or higher.

WARNING: Always return the lever to position 2 when

you go back to printing on ordinary paper. Continuous

printing with the lever set at a position higher than 2 can

shorten the life of the print head. Printing past the edge of

envelopes, multi-part forms, labels, or thicker-than-

normal paper can damage the print head.

Multi-part Forms

With the built-in tractor unit, your printer can print on continuous

multi-part forms. You can use multi-part forms that have up to three

parts including the original. Make sure you set the paper thickness

lever to the proper position; see the table on page 2-22.

Paper Handling

2-23