User's Manual
Table Of Contents
- FRONT MATTER
- PRODUCT UPDATE NOTICE
- CONTENTS
- INTRODUCTION
- CHAP 1-SETTING UP THE PRINTER
- CHAP 2-PAPER HANDLING
- CHAP 3-USING THE PRINTER
- CHAP 4-SOFTWARE AND GRAPHICS
- CHAP 5-USING THE PRINTER OPTIONS
- CHAP 6-MAINTENANCE
- CHAP 7-TROUBLESHOOTING
- CHAP 8-TECHNICAL SPECIFICATIONS
- CHAP 9-COMMAND SUMMARY
- APPENDIX
- GLOSSARY
- INDEX
- QUICK REFERENCE
Commands Arranged by Topic
ESC b
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Set Vertical Tabs in Channels
ESC b c n1 n2 . . . 0
27 98 c
n1 n2
. . .
0
1B 62 c n1 n2 . . . 00
Functions the same as ESC B, except that the variable c selects a
channel for the vertical tabs, which must be from 0 to 7. Therefore,
up to eight sets of vertical tabs can be set. The channels are selected
by ESC /. To clear the tabs in channel c, use ESC b c 0.
ESC /
Format:
ASCII code:
Decimal :
Hexadecimal:
ESC / c
27 47 c
1B 2F c
Select Vertical Tab Channel
Comments:
This command is used to select the vertical tab channel, with the
value of c from 0 to 7. All subsequent VT commands use the channel
selected by this command. If no channel has been selected, channel 0
is used.
9-18
Command Summary