User`s manual

The Pull Tractor
Paper Handling
1.
Make sure that the printer is turned on and that the paper release
lever is set forward to the continuous paper position.
Note: For both the standard width printer and wide carriage
printer, this is the forward continuous feed position.
2.
Set the first three holes of the continuous paper onto the built-in
push tractor as described in Chapter 2.
3.
Press the LOAD/EJECT button to load the continuous paper; then
press the FORM FEED button. This advances the paper one page so
that you can fit the paper onto the pull tractor.
Using the Printer Options
5-27