User`s manual

Using Continuous Paper

12. Turn on the printer. It will beep because there is no paper in the

printer.

Then

press

the LOAD/EJECT

button to feed paper to the

loading position.

13. Press

the ON LINE

button to set the printer on

line so that

it can

accept data.

The printer remembers the loading position and advances each page

to the same position. If you need to adjust the loading position, use

the micro-adjustment feature. See Adjusting the Loading Position in

Chapter 3.

CAUTION:

Never adjust the loading position using the

platen knob and never turn the platen knob while the

printer is turned on.

Note: Before you begin printing, check the page length and skip

over perforation settings; readjust the settings if necessary. See

Chapter 3 for details.

Paper

Handling

2-15