User`s manual

Switching Between Continuous and Single Sheets

CAUTION:

Make sure you tear off your printed document

before pressing the

LOAD/EJECT

button. Reverse-feeding

several pages at a time may result in a paper jam. This is

especially true for narrow paper (less than 6 inches or

150 mm wide).

Press the

LOAD/EJECT

button to feed the continuous paper

backward out of the printer and into the standby position. The

paper is still attached to the tractor but no longer in the paper

path.

Note: Pressing the

LOAD/EJECT

button once may not feed the

paper far back enough to reach the standby position. If the

PAPER OUT

light does not come on, you need to press the

LOAD/EJECT

button again. With normal-width continuous

paper, you can press the

LOAD/EJECT

button up to three times.

If, however, you are using narrow paper (between 4 and 6

inches or 100 and 150 mm) you should only press the

LOAD/EJECT

button once. Also, do not use this button to eject

labels.

Paper Handling

2-17